The RGH3 combines the basic fall arrest safety harness with a comfortable work-positioning belt in one unit. This safety harness is fitted with a rear dee and two side dee rings mounted to the belt and can be used similar to the RGH1 (see data sheet). When fitted with a pole/work-positioning belt (RGP1&2) the harness can be used for pole climbing or work-positioning on open structures. In certain circumstances the side dee’s on the RGH3 can be used for work restraint in the horizontal plane.The wide belt fitted to the RGH3 is comfortable and provides lumbar support to the operative. The belt is also fitted with three gear loops for carrying tools leaving the hands free thus maintaining the required three points of contact when climbing.This safety harness is fully adjustable and is fitted with rip stitch indicators.• 45mm water repellent webbing• Rear and side attatchment• Rip stitch indicators• Fittings made from high tensile steel alloy• Gear loops• Load weight = 21.5 stone• Standard 5 years life after first use - We do advise that the harness is checked before every use.